Confuse on the Mitsubishi air conditioner remote control symbols? With many advancements in AC technologies, you might be forgiven if you get puzzled by all the complex aircon mode symbols or names on your Mitsubishi AC remote control.
Currently, the Mitsubishi aircon mode is equipped with a number of specs for your ease. Apart from the standard cool modes, vane control, fan speeds, etc. There are many Mitsubishi aircon symbols ( also known as Mitsubishi aircon modes ) that can be very confusing.
Here is the guide on Mitsubishi aircon symbols:
Air purification
If you are Mitsubishi electric aircon owner and want the choice to purify your air, be on the lookout for the air purification spec. usually represented by amazing symbols, this permits the unit to active air purification via the plasma filter.
Natural flow
If you are looking for a whiff of nature, starting the natural flow feature in your unit might help. It generates a natural breeze by making the AC swing in different directions and very varying ventilation speed. This generally bears the symbol of air and a tree.
I-see sensor
This mode makes active the unit temperature feeler to decide and manage the airflow required by a room. Try searching for an aircon and limelight symbol to activate this spec.
Mitsubishi AC modes on your remote control
Fan mode
When the Mitsubishi aircon fan mode started, the internal fan within the AC circulates within the air inside a room. This is carried out without any chilling, much like a general fan.
The big benefit of using the fan mode in ACs is the clear power saving due to the absence of the compressor feature. Unfortunately, it does not provide any chill air but rather blows or circulates air.
Cool mode
What is Mitsubishi aircon cool mode? The cool mode of your Mitsubishi aircon settings turns on the compressor and pushes chill air into the room. When the inside temperature sensor within the air conditioner senses that the wanted temperature has been got, the compressor will stop working and just the fan will run.
This is the most power intensive mode on your AC remote control.
Dry mode
If you are living in a humid place, you will definitely be familiar with the dry mode setting in your air conditioner. When it is mainly a wet day, but not too warm, and you have sweat dripping from your forehead, this is your best AC mode.
What is the dry mode on Mitsubishi air conditioner? Mitsubishi air conditioner dry mode, also known as Mitsubishi aircon dehumidifier mode, gets rid of the extra humidity in your room by cycling the compressor off and on for little periods of time.
Aircon dry mode vs aircon cool mode. Which one is better?
Auto mode
Similar to aircon cool mode, the Mitsubishi aircon auto mode on your AC remote control serves to get a specified temperature set point and manage it. The AC mechanically adjusts the fan and compressor speed in relation to the present room temperature.
Once the preferred temperature has been achieved, the compressor is turned off, and the fan speed is also mechanically adjusted by the AC.
Mitsubishi aircon remote control replacement
If you are having trouble with your Mitsubishi air conditioner, these guides may help:
